| Material | SCM440 |
|---|---|
| Hardness | HRC40～45°±2 ° |
| Clamping Force | 5.2kN~6.9kN |
| Bolt | Clamp（10×60mm） Stopper（12×55mm） |
Vises & Clamps
LINEAR CLAMP (LINEAR VISE)
Superior in operability; it exerts powerful clamping forces for positively holding even multiple workpieces.
Feature
･ Incorporating a new slide type mechanism, it exerts powerful clamping forces in both the horizontal and downward directions, positively fixating the workpiece in place.
· Clamping and unclamping can be easily controlled by tightening and loosening the single bolt.
· Full processing of the workpiece surface is possible thanks to the flatness of the clamp top.
· Allows the workpiece to be loaded with a space given between the workpiece bottom and the table top, permitting an operation involving through-hole machining to be made in a single setup.
Specification
| Code No. | Model | T-Slot Nuts | Contents |
|---|---|---|---|
| 08-500 | LK-14 | 14 | Clamp & Stopper |
| 08-501 | LK-16 | 16 | Clamp & Stopper |
| 08-502 | LK-18 | 18 | Clamp & Stopper |
| 08-510 | LKS-14 | 14 | Clamp & Stopper & Locating pins |
| 08-511 | LKS-16 | 16 | Clamp & Stopper & Locating pins |
| 08-512 | LKS-18 | 18 | Clamp & Stopper & Locating pins |
| 08-520 | LC-14 | 14 | Clamp Only |
| 08-521 | LC-16 | 16 | Clamp Only |
| 08-522 | LC-18 | 18 | Clamp Only |
| 08-530 | LSS-14 | 14 | Stopper & Locating pins |
| 08-531 | LSS-16 | 16 | Stopper & Locating pins |
| 08-532 | LSS-18 | 18 | Stopper & Locating pins |
| 08-515 | LDS-14 | 14 | ClampX2 & StopperX1 & Locating pinsX2 |
| 08-516 | LDS-16 | 16 | ClampX2 & StopperX1 & Locating pinsX2 |
| 08-517 | LDS-18 | 18 | ClampX2 & StopperX1 & Locating pinsX2 |
| 08-550 | L-468 | 14・16・18 | T-slot nut of 14・16・18 on model LKS |
*Each set comes with a 10mm and a 12mm hex hey wrench
Dimension
Example of continuous work processing
