| Material | Probe:Ceramics（ZrO2） Shank:Steel（SKS） |
|---|---|
| Hardness | HRC58° |
| Repeated Accuracy | ±0.002mm |
Egde Finders
EDGE FINDER CERAMIC TYPE
Used in the spindle of a machine such as a mill to accurately locate the centre of a workpiece.
Specification
| Code No. | Model | Shank | Probe | Length | Proper Rotation |
|---|---|---|---|---|---|
| 07-703 | CER-10 | φ10 | φ10 | 84 | 500～750rpm |
| 07-704 | CER-32A | φ32 | φ10 | 104 | 500～750rpm |
| 07-803 | CEZ-10 | φ10(19) | φ10 | 80 | 450～600rpm |
The ceramic probe(ZrO2) cuts off magnetism and without iron powder attached. Outstanding wear-resistance.
How to use
1. Equip the shank of the edge finder to a drill chuck or milling chuck; manually shift the probe slightly off its centre and let it rotate eccentrically.
2. Gently move the rotating edge finder closer and closer to the measured workpiece; when contact is established, eccentricity gets smaller. The probe (tip) then stops rotating.
3. Gently shift the probe again to make contact with the workpiece; the probe then will slide along the surface of the workpiece. This position is the reference position distanced 5mm away from the probe diameter.
